With the COMPUTHERM E300 Wi-Fi Thermostat, you can control the device connected to the thermostat (eg gas boiler) over the Internet and check its operation with your mobile phone or tablet. With this product, you can control the heating of your home, house or resort at any time, from anywhere. The thermostat is particularly ideal if you do not use your apartment or house according to a predefined schedule, leave home for an uncertain time during the heating season, or if you want to use your holiday home during the heating season. The thermostat is particularly suitable for controlling underfloor heating systems thanks to the connectable floor temperature sensor. The product has two potential-free relays that switch simultaneously so that it can control up to two completely independent products. The relays in the device provide a simple possibility for eg. in addition to starting the boiler, the thermostat activates a pump or a zone valve, switches it on / off. Thus, using several COMPUTHERM E300 Wi-Fi thermostats, it is easy to divide a heating system into zones without a separate zone controller.

• Temperature measuring range (floor and indoor temperature sensor): 0 ° C to 50 ° C (in increments of 0.5 ° C)
• Standby power consumption: 0.5 W
• Temperature measurement accuracy (floor and indoor temperature sensor): +/- 1 ° C
• Adjustable temperature range: 5 ° C to 99 ° C (in increments of 0.5 ° C)
• Switching sensitivity: ± 0.5 ° C
• Temperature calibration range: ± 5 ° C (in increments of 0.5 ° C)
• Thermostat supply voltage: 200-240 V AC; 50/60 Hz
• Output load capacity (K1 and K2): Up to 230 V AC; 3 A (1 A inductive load)
• Operating frequency: Wi-Fi (b / g / n) 2.4 GHz