Insulation plug IPL 95
Special plug for external insulation composite systems

With the insulation plug IPL 95 direct fastening into external insulation material is possible - without thermal bridge. It is therefore a perfect solution for fixing in thermal insulation composite systems, hard-foam boards, polystyrene boards and many other substrates. The IPL consists of ageing- and weather-resistant nylon, is temperature-resistant from -40 to +80 °C and, thanks to its sharp cutting tip, drills reliably through hard ETICS plaster (up to 7 mm) - without pre-drilling.
The larger IPL 95 with head Ø 32 mm is ideal for larger lamps and letterboxes, but is also suitable for fixing rainwater downpipes. A metric screw M8 x 30 is included as setting tool for the SW13 drive of the plug.

Technical data:
- Type: IPL95
- Recess type: Nylon
- Recess type: SW 13
- Plug length [mm]: Ld 95
- Screw diameter [mm]: ds 8/10/M8
- Screw length [mm]: Ls 40+Anbauteil
- Units: 25pcs/Box

Advantages:
- Special plug for external insulation composite systems
- Direct fastening into the insulation material - no thermal bridge
- No predrilling necessary due to sharp cutting tip also drills reliably through hard ETICS plaster (? 7 mm)
- Nylon plug ageing and weather resistant

Applications:
Further specifications
- Lamps
- Motion detector
- Letterbox
- Signs
- Clothes hook

Areas of application
- External Thermal Insulation Composite Systems (ETICS)
- Polystyrene boards
- Hard foam boards
- Wood fibre insulation boards (pre-drilling: 8mm for IPL60, 13mm for IPL95)
- Heraklith boards